drill press table Post Source: woodworkingknowhow.com Posted: Oct 11 2008 02:04:25
the omazing race
i created this trophy for a scavenger hunt at the school that i teach at. the o is a city wide design in omaha ne. it consists of four species of wood. they include heartwood maple bloodwood and black walnut. if you look closely you will notice that the exclamation mark is actually floating i did this with a 18 clear plastic rod. this is a picture before i applied finish. i have ... [Show More]
mission coffee table Post Source: woodworkingknowhow.com Posted: Oct 10 2008 09:46:17
scroll saw blade holder
storing scroll saw blades became a bit of a mess so i dug into an old box that i had saved glass tubes that cigars came in that was given to me by a friend and there were lots and they were the perfect height for the blades. went to the fall off pile of wood and found some small pieces of 346 inch pine and made a sort of rack for the tubes. the top holes are bored at 34 an... [Show More]
scroll saw blade holder
storing scroll saw blades became a bit of a mess so i dug into an old box that i had saved glass tubes that cigars came in that was given to me by a friend and there were lots and they were the perfect height for the blades. went to the fall off pile of wood and found some small pieces of 346 inch pine and made a sort of rack for the tubes. the top holes are bored at 34 an... [Show More]
mission coffee table
i made this coffee table for a church auction building fund. made of flatsawn red oak mission style with solid wood top and shelf. was hand rubbed with a tung oil finish. i really like the natural wood look.
red oak rustic stump wood accent coffee table
this puppies on its way to brooklyn. i hear they are a little short on red oak there. this is a large beautiful pi... [Show More]
cherry and maple bookcase
this was the step in my home office furniture project see the deskhutch project hence the poor picture quality its about 5 years old so my digital camera at the time was suspect. its solid cherry frame and shelves with solid maple panels and cherry ply back panels. i based it on a bookcase i saw in a fww issue a few years ago.
still one of my favorite projects.
missi... [Show More]
cherry and maple bookcase
this was the step in my home office furniture project see the deskhutch project hence the poor picture quality its about 5 years old so my digital camera at the time was suspect. its solid cherry frame and shelves with solid maple panels and cherry ply back panels. i based it on a bookcase i saw in a fww issue a few years ago.
still one of my favorite projects.
spalt... [Show More]
center finder Post Source: woodworkingknowhow.com Posted: Oct 08 2008 00:46:35
try square
started making my own tools.
contractor to cabinet conversion
this has been in the planning stages for a few months and i finally got to work on it last week. for my 10 year old craftsman ts today was the big day for its jump from contractor to cabinet saw. ive always loved this tool as its been a rock solid performer since i bought it from its original owner. even its laughable... [Show More]
small step stool Post Source: woodworkingknowhow.com Posted: Oct 07 2008 21:25:46
pin marking guage
started making my own tools.
whiskey cupboard
hi
heres some pics of a cabinet i have just finished designed for keeping things like single malt or kentucky sippin whiskey in.the cabinet itself is made from southern mahogany an australian native timber with bookmatched silky oak lacewood panels in the doors. the stand is made from australian red ironbark.the finish is scandin... [Show More]
marking guage Post Source: woodworkingknowhow.com Posted: Oct 07 2008 14:46:49
shadow box memorial
a friend asked if i could build something to house a preserved rose from his brothers casket wreath. it was contained on a small wooden plate covered with a glass dome. hes what i created the out side boarder is bleached pine framed with mahogany maple burl frames the glass and koa was coopered for the inner box. there are two hidden led lights top and bottom. a micro switch a... [Show More]
ipod holder prototype Post Source: woodworkingknowhow.com Posted: Oct 06 2008 13:04:10
first time bottle stoppers
well i finally got to do something in my workshop. thanks to my friend grizzz for building my workbench pics to follow when its completely done but for now its definitely useable. this is my first attempt at making bottle stoppers. i welcome all comments and suggestions. thanks for looking
v22 ii
for a pilot friend of mine.
tags wood working project for kid wood ... [Show More]
v22 ii
for a pilot friend of mine.
refectory table or dutch pullout
i wanted to make a table that would extend out without having to store the leaves in a closet. doing some research i had found this style of table where the leaves are built in the table itself. i like it because there are no metal slides at all its all wood. the table is 36 inches wide and 72 inces long. it extends out to b... [Show More]
my first hutch Post Source: woodworkingknowhow.com Posted: Oct 05 2008 07:46:25
jatoba staircase
i built this staircase for a client in 2007. the work also included trimming out a large upstairs addition builtin cabinets throughout the house and various other tasks as they arose. my client was doing a lot of the work himself and we worked together a lot of the time. everything was made on site from scratch with the exceptions of the balusters and the handrail which were purc... [Show More]
wiskey case Post Source: woodworkingknowhow.com Posted: Oct 05 2008 00:04:34
maple box
i posted a blog about this box but never put it in my projects. so here it is. the box is maple. the branches are wenge. the leaves are a waterfall bubinga cocobolo and yellow heart. the border of the leather is bubinga. for full details check out the blog the box. thanks for looking.
baby cradle
i made this one for my oldest sisters first baby it was the first time i used wate... [Show More]
maple box Post Source: woodworkingknowhow.com Posted: Oct 04 2008 21:25:08
wiskey case
sepele with raised panel doors and a drop down shelf. this is an older project posted for another member.
my first hutch
this is the first hutch iv ever built.made it in three days last week.pictures are really bad coz it looks alot better in real life
tags wood working catalog fine wood working magazine wood working workbench wood working show free wood working plan custom woo... [Show More]
book shelf with file drawers
this is the first project i have built out of the new shop after our move. shop is still not done but i just had to make this. i was able to open the garage door and work in the drive. it is now fall and i have closed up the door with a wall. im starting to get used to the smaller space and i think that once it is all done i will like the smaller shop. i will put up s... [Show More]
mission chair 2 Post Source: woodworkingknowhow.com Posted: Oct 03 2008 21:04:08
decorative parquetry dinning table
this 54 diameter table top has maple birch walnut ebony. i cut the parquetry with a scalpel using the window method the outside bullnose edge is glued up with five 18 layers of solid maple. the radius rings of ebony were glued up on radius templates with three layers of 332 to equal the 14 ebony inlays. the center opening is open with a 38 thick beveled glass i... [Show More]
olive wood euro screw cap pen
it been a while since i posted a project so i thought i had better man up and get something on here. this is for a church sponsored charity auction. the wood is from bethlehem so i thought it was a nice touch.
curly ash plate
this was a fun project for a couple of reasons. it was my first attempt at turning a plate and also because as i turned the plate it reve... [Show More]
first turned pens
spalted maple slimline
had a little tearout in a bug trail but for now im just using it as is.
my first pen mahogany slimline
the box addiction grows
there is something about making boxes that just makes you want to make more. ive caught the fever. these boxes are the result of going out to the shop and wanting to make something but not having any specific plans in mind. ... [Show More]
hey dick debbie challenged me too.. while we were chatting yesterday she mentioned something about ceo dancing clowns.. or maybe she was referring to me ha.
anyways here we come
... and now one beautifuuul ballet jump
... and a sweet bonus from my brand new wife lol
the se photos are from a great friends wedding last weekend. i officially contribut... [Show More]
hey odie yup im like a little kid in a candy store ha as you may noticed i moved hr and gt buttons and now they appear right next to the my lumberjocks dropdown.
why this change i think they stand out better here and you can use them to quickly navigate through all three of our websites. same buttons are on other two websites too.
in addition i had to remove lj store button. instead i... [Show More]
Feeds and posts are not affliated with ://URLFAN. They are displayed here simply for informational purposes, if you would like to remove your feed please contact us.
Show Posts | 
